There are 3 Leg Styles to Choose From:

Standard, Double-Handled or Longer.

 

LAGUN TABLE LEG OPTIONS

 

Deciding which leg style to use depends on where you mount the bracket, as the system is only as stable as the bracket installation, plus, the distance above the floor adds to the overall height of the system.  A common oversight is measuring from the floor & forgetting this system is mounted off the ground.  Leg style selection plus selecting the right height to install the bracket is crucial for how the Lagun Table Leg system will function for your specific situation.

2024 Host Yukon & Cascade 2

*Photo above features a STANDARD LEG in a 2024 Host Campers Yukon & Cascade*

Standard Leg- The most common option.

The standard leg works for most applications – For Example: dinettes, campervans & boats.  When deciding whether this leg would work for your project, remember to take into account how far off the ground your bracket will be mounted.

  • From the bottom of the leg to the top of the table mounting plate is 23”.  This measurement does not include the thickness of the tabletop.
  • The slotted groove length is 11 ½”.  This means you can adjust the leg 6” up or 6” down

Double-Handled Leg- Allows more adjustment range.

For example, this would be beneficial if you want to utilize your table at multiple heights.  When determining whether or not this would work for your application, don’t forget to take into account how far off the ground your bracket will be mounted.  This leg can be adjusted 11 1/2” down, so the bracket would need to be a minimum of this height off the ground to obtain the full adjustment range.

    • From the bottom of the leg to the top of the table mounting plate is 23”.  This measurement does not include the thickness of the tabletop.
    • This leg is the same length as the standard leg.
    • This slotted groove on this leg is 17 ½” (6” longer than the standard leg).  This means the leg can be adjusted 6” up or 11 ½” down.
DOUBLE HANDLED LEG in a Northstar 850SC

*Photo above features a DOUBLE HANDLED LEG in a Northstar 850SC*

LONGER LEG in a Sprinter MBZ van conversion

*Photo above features a LONGER LEG in a Sprinter MBZ van conversion*

Longer Leg- Provides more height overall.

When determining whether or not you need the extra 8″ height, don’t forget to take into consideration how far off the floor the bracket will be mounted.  This distance will increase the overall height of the system.

    • From the bottom of the leg to the top of the table mounting plate is 31”.  This measurement does not include the thickness of the tabletop.
    • This leg is 8” longer than the standard leg.
    • This leg has the same slotted groove length of the standard leg (11 ½”).  This means you can adjust the leg 6” up or 6” down.

leg handle position blogLeg Handle Position Options: Right Hand or Left Hand

The leg also allows a handle position choice between Left Hand or Right Hand.

This option only refers to which side of the leg the handle is located.  It does not change the function of the system and has nothing to do with which side of your van/RV you will be installing your system.

When making this choice,  you want to factor the location of the leg and whether vertical adjustments can be made without the handle bumping into objects, potentially breaking the handle.  Or if you are installing the table leg system in a corner, it may  be more convenient to have the handle on one side of the leg compared to the other.

Skip to content