Product Details

What is the difference between the Sliver Bracket & Standard Bracket?

The Sliver Bracket may be preferred for a smaller installation area or for aesthetic purposes, as it’s “invisible” behind the leg for a cleaner look.

Click here for more information on the bracket types.

Regardless of which bracket is selected, the Lagun Table Leg system can support up to 50 lbs (40 lbs if using Folding Table Mounting Plate). The bracket needs to be installed on a solid vertical surface, as the system is only as solid as the bracket installation. All bolt holes should be utilized.

Why is there a choice between Right Hand and Left Hand leg handle position?

Some customers find that they have limited space when installing their Lagun system and may need the leg handle on a specific side. There is no difference in the functionality of the system between the two options. This option pertains to the leg (vertical piece) only.

This decision has nothing to do with which side of your RV or boat you are mounting the bracket. When making this choice, face the location you want to install the Lagun Table Leg System and factor whether vertical adjustments can be made without encountering obstacles in your RV or boat, that could potentially break the handle. Please see PHOTO for reference.

What is a Factory Second (2nd)?

A factory 2nd is new with cosmetic scratches and blemishes. These will not affect the function of the system. With a Factory 2nd Leg, you will NOT be given the option to choose the leg handle position. Click HERE for more information.

Measurements, Clearances & Specs

ARM: One Option Available

arm to table mounting plate product details sheet

TMP: 2 Options Available: Standard or Folding

*Folding TMP available as a part only as we have a limited supply available. For this reason, it not currently offered as an option with a system. If you would like to substitute the Folding TMP for the Standard TMP with your system, please email us for assistance.

ARM TO TABLE MOUNTING PLATE (TMP) CONNECTION

arm to table mounting plate product details sheet

BRACKETS: 2 Options Available:

Silver/Narrow (3 Hole) or Standard (4 Hole)

bracket details graphic

*Measurement from back of Bracket to front of Leg is same for all leg options.

LEG: 3 Options Available:

Standard, Double-Handled or Longer (Standard Leg also available in Black)

arm to table mounting plate product details sheet

*Leg measurements shown above include tap.

Standard Leg: Adjustment range 6″ up or 6″ down. Aluminum tube 19 11/16″ long. Overall length with tap installed 21 3/4″.
Double Handled Leg: Adjustment range 6″ up or 11 1/2″ down. Aluminum tube 19 11/16″ long. Overall length with tap installed 21 3/4″.
Longer Leg: Adjustment range 6″ up or 6″ down. Aluminum tube 27 1/2″ long. Overall length with tap installed 29 1/2″.

Installation Clearances

A. From bottom of Leg to top of TMP. This measurement + tabletop thickness is the total overall height of system.
B. From bottom of Leg to top of Arm.
C. From bottom of Leg to bottom of Arm. This measurement would be the height required to swivel the Arm over an object.
D. From side of Standard Bracket to edge of Leg handle. Sliver Bracket would be hidden behind Leg = Measurement E.
E. From side of Leg to edge of handle.
F. Arm overhangs Leg 7/8″ at connection point. If mounting flush to vertical surface, Bracket must be shimmed out at least 1″ to allow enough clearance for Arm to swivel / pivot.
G. Length of Arm overall. Center to center bushings (pivot points) = 12 3/4″.
H. From bottom of Arm to top of TMP. This measurement + tabletop thickness would be the amount of space needed to store tabletop when not in use.

arm to table mounting plate product details sheet

*Photo above on LEFT includes Standard Table Mounting Plate (TMP).
*Photo above on RIGHT includes Folding Table Mounting Plate (TMP).
*Standard Bracket is shown.

Skip to content