Factory Second Longer Leg w/ Sliver/Narrow Bracket – SILVER COLOR

PLEASE NOTE:

May contain scratches and blemishes. These are NEW systems & the flaws will not affect the function of the system.  Please see photos in listing for examples of markings.

SPECIALTY: The Longer Leg is considered a SPECIALTY part. It adds 8" overall height but has the same vertical adjustment range as the Standard Leg.

• When determining whether or not you need the extra 8" height, don't forget to take into consideration the height off the floor the bracket will be mounted. This distance will increase the overall height of the system & is generally too high for the common dinette sitting height.
• Longer (Specialty) Leg Common Applications (not limited to):
  • Countertop Height
  • Standing Desk
  • Mounting near Van Entry / Step / Below Floor Level
• Need help deciding whether the Longer Leg will work for your application? Check out this BLOG article for more information: The Longer Leg: A Specialty Item
  • For comparison, the classic tube/pedestal style table legs that are mounted in the floor typically range from 29 1/2" to 31 1/2". The Lagun Longer Leg is 31" from the bottom of the leg to the top of the table mounting plate. When taking into consideration the Lagun Bracket is mounted above the floor, it makes the Longer Leg taller than a pedestal style leg.

Customization: We do not have the ability to customize the Lagun Table Leg System beyond our current options. We also do not have any variations of any of the parts & accessories listed on our website.

Tabletop: Not included. You may be able to re-use your existing tabletop if it is within the dimension guidelines.

Modifications: Should you choose to modify any part of the Lagun Table Leg System or its installation, it will void your warranty.

Compatibility: The Lagun Table Leg System is NOT compatible with the round tube style table leg, as the system is only as strong as the bracket installation. We do not currently offer a floor adapter, however, we have passed this onto our development team. We're happy to report they are working on it, however, we do not have an ETA on when it will be available at this time.

Check out the RESOURCES tab for additional information - including bracket placement tips, adjustment range specifications, tips for handle position selection & lots of useful information to help you decide which system would work best for your application.

Click for Instructions

Factory Second Longer Leg System:

• Adds 8" more height vs. the Standard Leg (does not change vertical adjustment range)
• Total maximum weight is 50 lbs (includes the tabletop and anything placed on top)
• Maximum tabletop size is 30" X 40" (you may be able to re-use your existing tabletop)
• From the bottom of the leg to the top of the table mounting plate is 31"
• The leg has 11 1/2" of slotted groove area to allow for vertical adjustment (same as the Standard Leg)
• The bracket must be within the slotted groove portion of the leg.

Factory Second Longer Leg System Includes:

May contain scratches and blemishes. These will not affect the function of the system.

Each system includes 4 main parts:

• 1 Leg
• 1 Arm
• 1 Standard Table Mounting Plate (TMP)
• 1 Sliver/Narrow Bracket w/ Bolt Kit

SHOP ADDITIONAL PARTS

• Add an extra Bracket to use your system in multiple locations
  • Move your table from inside to outside
  • Extend your countertop space
  • Use your table on a pontoon or boat
  • Add a side table next to the grill
  • Maximize your deck space by mounting your side table
  • The possibilities are endless!

Factory Second Longer Leg System Parts Breakdown:

Longer Leg (8" longer than the Standard Leg, same vertical adjustment range)

• LEG HANDLE POSITION MAY VARY, NO CHOICE OFFERED
  • Click for Photo
  • Click for BLOG Article
• Comes complete with tap and handle (plastic w/ ss insert) installed.
• Leg End Cap not included. (Available as part of OPTIONAL Cap Kit)

Arm

• Comes complete with 2 bushings, 2 arm end caps and 2 handles (plastic w/ ss insert) installed.
• NOT Available as part of OPTIONAL Cap Kit

Table Mounting Plate (TMP)

• 9 7/16” x 7 7/8”
  • DISCONTINUED SIZE: 11 13/16” x 7 7/8”
• Comes complete with tap installed.
• TMP End Caps not included. (Available as part of OPTIONAL Cap Kit)

Sliver/Narrow Bracket w/ Bolt Kit

OPTIONAL Cap Kit

• Includes 1 Leg End Cap & 2 TMP End Caps
  • Arm comes complete with 2 Arm End Caps installed.
  • Extra end caps can be purchased individually under the Parts Tab