Bushing (Pair)

$18.00

Category:
  • Sold as a pair
  • Each bushing is installed on opposite sides of the arm 
    • When assembling the system, the washer part of the bushing should always face towards the taps of the table mounting plate and the leg.

The original bushings are pressed in by machine at the factory & are not the easiest to replace by hand.  We strongly encourage purchasing a new arm with bushings already installed.  CLICK HERE TO PURCHASE ARM.

Replacing bushings by hand is not the easiest task and some tools (not included) are required, such as hammer, pliers, etc.  Here are some tips:

  1. Remove old bushing (may need to crack the bushing first)
  2. Line up the line on the washer part of the bushing with the cut in the arm
  3. With a board on top of the bushing, firmly yet carefully tap the board to install the bushing, making sure that the bushing is going in straight.  This will be a snug fit and the outer edge of the bushings will shred.

Shades/Hues may vary due to black anodized process.

PLEASE NOTE: We do not have the ability to customize the Lagun Table Leg System beyond our current options. We also do not have any variations of any of the accessories listed on our website. Should you choose to modify any part of the Lagun Table Leg System or its installation, it will void your warranty. The Lagun Table Leg System is NOT compatible with the round tube style table leg, as the system is only as strong as the bracket installation.

CAUTION!! The "Original Lagun" parts are NOT compatible with the knockoff systems.

Skip to content